Vinyl Car Wrap Prices In Los Angeles

Car Wrap Prices and Vinyl Maintenance, Los Angeles

When you buy a vinyl car wrap in Los Angeles, California, you want to make sure that it is reliable, and that the prices aren’t inflated. In most cases, you shouldn’t have to worry too much, because these wraps are typically durable and worth the investment. However, you may have to consider a reasonably simple repair process if your wrap ever gets damaged and needs detailed and high-quality repair.

What to Recognize Before a Repair

As an owner of a vinyl car wrap in need of repairs, there are a few steps that you need to take to ensure that things go as smoothly as possible for your needs. First of all, you need to make sure that you know how extensive the damage is to your wrap. How far does it spread across the surface of your car? And is it devastating or just a minor scratch problem that can be easily fixed?

Next, you need to know what kind of damage you are looking at on your vehicle. Many types may occur, each of which is quite different. For example, some dirt stains can be a real issue if you’re trying to keep your wrap looking great – it can even lead to wear and tear on the surface of the wrap that causes damage to spread and become more consistent and harder to repair.

Lastly, you need to see if the damage has torn through the wrap itself and affected the metal or any other element of your vehicle. In most cases, minor damage isn’t going to result in extensive problems. However, there is always a chance that such a devastating spread of damage could affect your wrap and make it less attractive for your needs. A number of car maintenance professionals in the Los Angeles area can help you diagnose the damage done to your vinyl car wrap.

Make Sure You Have These Items

Next up, talk to a professional to compare new vinyl car wrap prices and the cost of repair. It may not always be wise to take care of this situation on your own, but there are times when it makes good sense. We always suggest it if the damage to your wrap isn’t too extensive for you to handle yourself.

However, you’re going to need to invest in a handful of tools to keep your wrap in good shape for years. We believe that you are going to need an Exacto knife, a Squeegee, a microfiber towel, a 2,500 grit sanding block, a spray bottle, a Seal-It pen, a new piece of vinyl for the wrap, and a heat gun that you can use to heat the vinyl when you have correctly applied it.

Make sure that you talk to repair experts about where you can find them at a reasonable price. Often, it is quite easy to find them at a wrap shop or in a typical auto repair shop near you. Try to make sure that everything you do is by the books here – otherwise, you may end up doing repairs that don’t help your wrap or make it less attractive than when you’d started.

Getting Ready for Repairs

At this point, you are just about ready to start repairing your vinyl car wrap. However, you’re not clear yet – you also need to clean and prepare your wrap in a way that makes it easier to clean. Start by using your microfiber towel to wipe away any dirt or debris in the area. This dusting should be done smoothly and consistently to produce good results here.

Next, use a mixture of water and dish soap to scrub away any dirt or stains on the area. Pay attention to wax, grease, and any other types of debris that may have built upon the surface of your car. Now that you have cleaned the area, you need to use your sanding block with light pressure and horizontal movements to remove damaged vinyl and level the repair site properly carefully.

Make sure that you pay attention to any deeper gouges and use lower-grit sandpaper to produce a good result. Fill in these areas with Bondo or any other filler to make sure that the surface is level and smooth. You can clean the area again, wipe it down with a towel, and carefully seal the edges with your Seal-It pen to keep them from getting any moisture beneath the edges.

Putting Your Wrap in Good Order

At this point, you are ready for the vinyl car wrap repair. We urge you to make sure that you are entirely up to these repairs. You’re going to have to do many steps that might seem difficult to you, such as cutting and applying the vinyl patch based on measurements that you take. You’ll use the Squeegee to carefully remove the patch back and apply it to where you want the repair to go.

In some cases, you may be able to get pre-cut patches that can fit over your vinyl more easily. We suggest, however, that you always cut your patch. Doing so helps to make the repair more accurate. Ensure that the piece is the same size and shape as the damaged area and carefully press it into place after you remove the patch backing.

Press the patch down and work out any air bubbles that you may find. Make sure that it is even and then use the heat gun over the surface to stretch the vinyl as you apply it. At this point, your patch should be ready to go. Just cut away excessive wrap and seal the edges with the Seal-It pen.

Let Us Help Repair Your Wrap

Let’s face it, car wrap prices in Los Angeles, California can get out of hand. While the vinyl can provide you with years of enjoyment if properly maintained, you may not feel comfortable repairing it on your own. Luckily, you can always reach out to us at 360 Wraps and get ahold of the situation.